StandardSciPonder

SwimFlight

Flying is like swimming,
if a fish were so heavy they sunk when they stop swimming.

True Structure Formation

TRUE STRUCTURE, Forms with TENSILE ALIGNMENT PARELLEL.

It's Very-Much-Less the compressive; Vastly-Far exceeding more is the Tensile-Reasoning of the structure.

The space of Tensile Alingment becomes INSESIVELY SMALL, the truer straightend the tensile is taught.

All Are Fooled

You are Duped, and so is EveryOne around us. We are all treated like Uneducated Fools, and we are.

         
This is a DevelOp(t)ed CULTure.. [emphases parabel pronounce].
         
         We are told.. and We Believe... Thus We are Stupid...
         otherwise We disBELIEVE and are stupid still..
         
         Only when You know Enough... AND THINK ENOUGH... Can You PROVE Otherwise..
             
             
             Example: EVERYBODY "KNOWS",
             Sending Someone Way Up Top The Mountains Of Alaska, is a great place to get gold...
             
             Thats where the mountainers go.
             
             ...Think about it....
             
             Do You see what I did..
             Ive told You truths and lies...
             
             this example is a common disknowlege, mountainers do go up mountains, but Alaskan Mountains Are THE WORST LOCATION ON PLANET EARTH TO FIND GOLD...
             
             There is almost no other location on the surface of this planet you could possibly go that has less gold.
             
             
             What else do you think you know?
             
             !!!Think about it!!!
             
             ..do You Believe ME?
             
             Do You understand why this is true, or false?
             
             Let Me enlighten and educate you with a hint or two, climbing your conclusions.
             
             Climb up or down, to gold?
             
             Sending someone uphill to find the heaviest of objects, is like searching the bottom of the water pool for the inflated beach ball.
             
                 ..DENSITY + GRAVITY..
             
             Okay.. So why is ALASKAN MOUNTAIN a lousy place to find the EASIEST METAL?
             
             Because there isnt much at the Bottom Either...
             Do You Believe Me?
             
             Why Might ALASKA be a poor choice, for gold to be?
             
             it doesn't like it there..it runs away..
             
             ..Truth or Fiction..
             
             Gold Runs uphill not Downhill?
             
             Gold likes to travel, Especialy TO OR FROM Alaska mountains.
             
             Where is Alaska close to?
             The North or South Pole?
             Which Pole does Gold Migrate most TO OR FROM?
             
             Understand where I am going with this? Or better, understand gold?
             
             Gold has similar property as Copper and Bismuth.
             ..though ive only tested Copper.
             
             Diamagnetism will Migrate, disimilar to IRON To Alaskan (Mountains(base)).
             
             The Equator will have the Most Au.Deeply.
             
             
             .......
             
             
             EXAMPLE 2,
             Extension from 1
             ...
             EVERBODY KNOWS panning for gold...
             
             ..BUT EVERYBODY IS AN UNEDUCATED FOOL, especialy of gold.
             
             a shallow comodity pan.
             
             Rinsed over ripples over a near horizontal shallow slope..
             
             This is What everybody was taught.. the SABOTAGE.
             
             It also Is amongst Worst possible methods.
             
             Tedious to set the sift juuust right, an art they may say.. a tedium in stupidity is more or less acute.
             
             We Are Dumb!
             
             a deep cup is far superior.
             
             ....
             
             Almost Every Comon Knowlege.. Is A Twisted Physchopathological Dupe.
             
             
             ALL ARE FOOLED.
             
             Conscienceousness is the cure.
             
             

Scientificvegan's thoughts and observations pondered here

RottenResponses

Pissing on walls is a ROTTEN RESPONSE, But it makes sense, as does fleeing...

Scientificvegan thoughts and observations pondered here

So in soil is nature of detriMalEffect.. Many malities evolved side by side us all species for eons.. Some make us want to piss.. ALOT.. LIKE REEEAAALLLY BAAAADD.. Thats why sometimes SUDDENLY Everyone needs to piss... its in the air... probably a cloudy day nearby..

Cats Dogs and Rodunda often like to piss on everything.. I believe it a long nasal targeting amonia transmited mality..

Other animals are obviously also induced, but their nature is acute. Humanimals often exibit the same.. Piss on walls.. its a sign of the disease mality.. though most himanimals wont piss on the walls inside on the drywall, like cats, but exterior brick likewise...Why does this make sense similarily??

both contain excesive levels of Ca Calcium.. Calcium nitride is solid and not fluid until over 1000 degrees centigrade, thus not vapour.. stop the spread... yet there if noses closely..

this behavior benifits Both Parties.. both the Animalia Kingdom to reduce the open spread into the air, and benificial benifit to the Rot Kingdom being still spreadable, to its acute.

Running away is a sensable fleeing response , as many will reciprocate the action to various degrees to evolutions cause for effect or ceasation Many of the RotKingdoms Followers preditate mindlessly..they become Creatons-of-the-Foul, no longer consisely aware of their inuitive natural responses which tend to take over them. Running away, fearfullness, Feeing, Misbehaviors, Destitution, Very destructively oriented responses are typical signs of an Infection disease or enzyme of the RotKingdom..

A creature being induced by such creaton infections, has many evolved reasons for this flighty or twitchy behavior, as the creaton preditors of the sensory for the rot of their attracted induction alures them.. an uninfected body may or not auto behave the same, when two other bodies approach, simultaneously, for example.. Especialy if telling misbehaviors , likewise if preditor alure fumes.

For-by Worser..These are ROTTEN Responses..! beware ..

..bekind.. treatment can kill with kindness the mality.

a kick in the head might break their nose.. or Lye on their face or pillow may choke the fume..

Wagoneering Techniques

I goto gtfo of here. Welding by Bulb.. Bolt and Candle.. flame and Can of masses.. Magnifying lense at day.. Electrical Ring and Mirror at anytime.. ...The Ring Wire Mirror, can Weld ANYTHING that does not sublimate... ..though i have not siimply built one yet. i presume this will be simple and calculable during build adjustments. The bulb is yeilding disapointing results for welding and tediums in setup handling.. however due to slow pace, is effective for string thread pulling, of ordinary thermal polymers.

Flatsheets are going well in oven between tiles and flexable nonstick baking/grill mats. just over the dial of 300F ~~120C. No Holes.

3to 7 minutes from cool, air fry.

7to10 minutes from cool, on bake.

Instant formation after heated, but wrinkle shrink warpage upon setup.

Likewise, Cool removal prevents thermal warping.

Hot removal causes goostring.

warm removal requires faning both sides or dousing to set the shape unwarped.

Hot removal can be done by keeping between sheets, then cooling externaly.

The Number#1 Plastic Recyclable material, cannot be more than slumped in my quartz heated toaster oven.. dial capping at 450F... The Houshold oven dials to 500F.. which works perfectly for melting and gravity casting of Number#1 (LDPE?? HIGH DENSITY SINKER) Plastic bottles.

however.. the clarity Technique now discovered, and simple, to choose opaque or Clear, is a great Perspective Benifit and Spectrologicaly for radiative aplications, is all great.. hovever... I cant remove it clearly well, requiring cooling first... thus sticking it to cast pan.. heating the cast pan releases to plastic, but interferes with shape, and rapidly the opacification while slowly cooling. Silicone is often only rated to 200C around here.. and caulking for pure silicone prices are high.. The baking and Grill mats are near same.. and the teflon fibreglass bake and deepfry meshes are likewise similar, all to my surprise. Some school glue outlasts the silicone, and is more afforded and available and requires very little setting time being heatable. Many glue mateswatches are degrading at 500F however.. usable flately, but loosing the flexability, becoming ridgedly brittle. 120C shows zero degradation to flexability, Thus Silicone is no longer viable for purchasing compared to school glue, for thermal set environments. Aluminum cans are being tested to replace mat materials.. woven metals are next.. however, castable form flex solutions will still be required.. ThermalMats copyright requires permission of copyright holders, and Their Endorsed Payments To TabooSaboo SciVegan taboosaboo@gmail.com etransfers accepted taboosaboo.neocities.org/Terms PayPal.Me/TabooSaboosEndorseMe DietCoke CocaCola PresidentsChoice Distilled water Croyola washable schoolglue Dollarama CalvinGlue LePage Glue ^{ThermalMats, nocopyright thirdparty permissions of copyright holders is required, or Their Endorsed Payments To TabooSaboo SciVegan taboosaboo@gmail.com etransfers accepted taboosaboo.neocities.org/Terms PayPal.Me/TabooSaboosEndorseMe} cooky cutter shape placement gravity cast formats will be cheaply implemented, until permaflexable cast solutions/pastes/,clays are found.

Construction site and reno toss off are amongst the best sources of large application structure quantity material.. like plastic floor boards..

likewise buisnesses are a large source of regular high quantity recyclable materials on repeat bases, very stable resource

Magnetic Wrapping

Magnetism is Not Polar.. Magnitism is Wrappar.

A current of electrucity enrings Planet earth.. Electricity is Polar, the polarity ring is East West.. Probably due to the spin in beside thermal radiation (the sun through the spacial vacum)..

......therefore thermal stroking in a polar direction, induces an electrical polar charge.

Thus The magnetic field enwraps that wring of electrical current.. likewise a permenant seeaming enwrapment of magnetic field through the likely larger cross area of electrical ring making it seem polephilic, whereas the least electrical resistance is in fact reciprocal perpindicular and tangent. And losing its electrical structure for conductance upon heating... ...thus therefore, i predict ceramic or SemiCrystaline perminant magnets increase their magnetic strength as temperature rises, until melting point falls the structure if disfavorable. Reciprocally Metal Magnets Become Super Magnets at Lower temperatures, due to the same favour of better electrical polarity conductance by opposite thermal degree. Magnetic wrappings are wide, not polar when electricaly conducted by a long length of wire. Picture this. this (un)massively far field of object .

Nearly unlimited reaching interactions, with all other far fields in the world holding place together.

StraightToGravity BentTimePathLight

Gravity is where it will go, Light is taught to where it will go [and from..
..or not taught from!!@ got it.. reverse.. its origin moved like its destination... straight each way... but the mass originsdestinations are loosely forced.]
Origin one durection of falsetime Destination the other direction of false time... Which one is Gravity? Which one is emiter of light ? Time is disrelative to light. only Destination and Origin.

Sciveg thoughts and observations pondered here... Bent forces of reciprocate time and placement. Light is not crooked? Ever??? The time is bending the straight path to its gravitational mass of destination.. its like it knew where the force was attracted.. probably connected the whole TIME... The mass the light encounters, will be there, some day.. as it ventures past stars and planets.. or nearer sooner a lamp, but that is a difficult distance to time. The objects in the periphrial of the path of the light, HAVE ZERO INFLUENCE; GRAVITATIONALY... But it ends at a gravity mass, that can produce and transfer HEAT.. HEAT IS RECIPROCAL TO LIGHT... LIGHT TRAVELS STRAIGHT.. ALL FORCES ARE CONNECTED TO ANOTHER... LIGHT IS THEREFORE ATTRACTED TO COLDER OBJECTS THAN THE LIGHT. Light IS HEAT. Light knows its defered path? Can light be interupted... or was it always going to arrive there? It went straight... only refraction curves it.. but its not a curve .. its a new angle... and it may have been the straight path of sequence... was this an interception? Was this part of the initiating force that caused the release of the light??? Does the destination have a reciprocal connection to the initiation? Time is not real..its cause effect relativity... The path was always. the path is. the path was and is. the path was and is the force. ...day later.... rereadingg..corrections.. apend consice.. Conclusion: HEAT REPELS LIGHT.. Therefore knowing this hypothesis, a hotter than light object, may bend light's path... and Likewise I may bevon route to discovering what repels gravity....Cold?

SlowPerfectPractice

Slow attenuation focused detail practice...makes perfect.

Going rushy is dumb.. Natural paces following the attenuation become limitless in every improved detail, thus needing no rush.. dont force initial pace..

FumbleFingers.. Gravity is slow, slow down.. dont delay too long... its the VERTICAL DROP, Requiring the reactive flinch catch hand.. NOT THE HORIZONTAL.. Tiltering, is sloowish.. dont be flinchy for the horizontals...

The attention to detail, was to notice what DIRECTIONS, required what DIFFERENT pace-of-MOTION.

Angle of detail is another.. Intersection of dimensions in this reality are typically perpindicular dimensioned.

MiscableSolidsArePOLYMERS

Refer to heading "MiscableSolidsArePOLYMERS", for brief acurate consice summated statement of the topic matter, as it also defines that...

Mixed sugar dough, today.. the other day, it produced a noodle stretch dough string within.. today, I made techniques, probably many other artisans discovered also, how to mix by crumble rolling dough to pieces, to increase surface area attatchement to powder, instead of squish kneading one outer large layer at a time.. Anyway.. after trying to instantly crystalize salt saturate, by adding sugar after, it didnt, I then got to mixing in flour.. It also had peanut butter powder, so I also discovered reeces core. With candy making in mind, or a sugar wiking stone..
... anyway...
...Miscable Solids...
Sugar is one of those...

all that bullshaz distractions about poly chain mer blah blah, is a bunch of waste your life postula dont know what they are fuchtalking about, close that book, shut off that channel...
Polymers are miscable solids, thats all.

Solid+solution=Polymers

Again that equation is as stated and follows:

SLD+SOLUTE=POLY

More acurately, Polymers are solids slipping on their solution.

Technichaly it doesnt need to be miscable, but it helps guarantee against grainulation.

I dont know about you, but when I have global scale epiphical knowlege insight disbarring the mass disillusion of unknowledge; thats a good sumat for me. NV,SA,BY,IF$1%

Thats My Ponder Observation Experience Insight Conclusion and Terms for You and or Anyone, enjoy SciVegan MaterialScientist.

ScribbleMath, forward multiple, back divy

1×2×3= 1 2 6 ÷2=3 ×4= 24 ÷3=8 ×5= 30 ÷3=10 ×5=120... 25×5=125-5=120 .. 24×2=48×2=16+8=86+1=96+24 100 110 114 120

NoodleStringSugarDoughTechnique

This is a big polymer.. tastey.. The order of the Technique matters.. as i was having polymer epiphical insights, squizing penutbutter powder dough, Trying to crystalize out the salt... the compitition for hydrate! Sugar I presumed strongest being miscable, but maybe its not, perhaps salt is stronger, as it didnt crystalize out.. dough had a hard time competing for wik...ill do anotger test based on this.. .. anyway... NoodleDoughStringPolymer... Adding sugar first, is not as good... the dough will have a hard time getting wettness from the sugar goo... Make flour dough goo first, then add sugar, the sugar is miscable, so it will moist and wet easily, and bind to the hydrate of the flour dough goo... thats it.simple. order of bonding. bonding series.

CNaCl FilamentHousing

NV,SA,BY,IF$1%

People fight themselves alot, and the obvious, unwittingly and foolishly with or without tenacity clevar or not... OXIDES, ARE NOT A GOOD HOUSING FOR REACTIVE FILAMENT!! ..so i stopped trying to think of an oxide that might not react...

Accept Observations, as they are. Fighting the result to a preconseved notion may be more dificulty than plausable.. Change to a different variable if nessesary. ..if a problem is less reactive than another, consider just that. Considering what ELSE, doesnt react with oxygen other than pre reacted oxides, was an obvious hangup i was clearly hungup on unwittingly. AlO...NaO... Glass.... Water glass??... anything with Oxygen can explode with a sublimatable filament reaction.. hence blast furnace... it WILL GET TO PRESSURE OR TEMPERATURE OF REACTION eventually... had to switch... with metal filiments i just kept seeking oxides, knowing thed only melt... avoiding carbon rods to even bother a brittle thought of rarety of production.... using the mechanical graphite to ignite the homemade candle with last night against aluminum electricaly, after seeing aluminum flash white... i decided, carbons hottest... try it...

its a simple solution..if you get my meaning

NV,SA,BY,IF$1%

#1Plastic, #Upcycle, BreakSizeLeverage10to1

at a square measure of 10 to 1 , length side to thickness , the upcycled #1 plastic bottles that melted to a tile of a few mm thick, becomes stronger and less easily broken britle at that size of its leverage.

VinagarGlue_EthylOil

oil coagulates by certain exposure.

Ive observed oil coagulations a number of times over the years.. elastic band exposure disolvtion; years of Time in a jug outside changing seasons; Spill and atmosphere exposure with particulate contaminentvover time.... now Over-Night vinigar and glue drop..

I tried analyzing this observation... i also tasted it.. it was to my surprise... Deliscious sweet. like golden brown sugar.. this was from dark vinigar and a drop of white school glue, that didnt mix easy with a paper clip in a glass clear bowl.. tipping the bowl, the dark translucent substance no longer flows, but is a gooey liquid.. I noticed on the 2nd or third day, another clear liquid formation.. on touch and tasteless it was oily... .. during wagoneering i desided to taste test the glue, touching my tongue tip to finger, it was bitter as the skin of fruit, berry bush particular being noticible in bitter magnesium.. coagulative or soluble 2nd alky earth elements (Mg Ca).. ..ive noticed before and ponder deduced the observable near tested conclusion of bitter to acid to sugar, shown by fruits, then also shown by vinigar.. Vinigar turns also alcoholic in cases, and likewise wine gum sweet. ..people mentioned oxidation as coagulative oil causevover years, but i was sceptical, seeing it also in a closed jug, though in other cases an imploding sealed cupula.. . Alcohal has some oxygen when dilute only.. which it often is.. this carbon substance is often more companionable with likewise hydrocarbons, however being also miscible with water, unlike many hydrocarbs not wanting to mix with anything... anyway.. I chemicaly analyzed some, and put them together.. .. the oil in jar is slower now with a fewcsquirts of alcohal, barely.. but i think the alcohal is mostily volitile.. the vinigar, may give more weight to holding it unvolitile in solution, and is acid, thus accelerated the affect, also being reciprocal cimpound to alcohal production as a carbonic compound, it also conjuncts with biterants as was in the glue, but there is no bitter nor vinigar in jar, and bitterant and vinigar leads to sweet wichbindicates sugar whichbis a sticky hydrocarb.. ..I will be repeating this with bitterant.. also soap is comon with bitterscand oil, also being coagulayive and water oil soluble.

FlexsetCastMat

This particular model is Thermaly resilient just over 200C or 400 to 500 F. Becoming more flexable when heated. After Exceeding thickly 400F the set factor is ridged after cooling.

NV,SA,BY,IF$1%

Trade secret Ingredients include Thermoset paste (aka Schoolglue), thats it realy.. paste it by itself or on other high temperature materials, like foil woven wires fiberglass stone fiber popcans etc.

ChewToGoo

Live with a healthy bodily promotion... Chew To Goo.

Drink Plenty of Fluids, PRODUCE PLENTY OF FLUIDS!!!!!

Be sure to Drink plenty of Fuid.. Drink Fluid Before or and After Chewing to Goo... but avoid during.. The idea is to promote the bodies fluid production... Doing this will live longer(!), Im Sure of it! And Im starting Today!

Notice: You may notice, at certain goo HYDRATE VALUES, the body is more or less satisfied or detered...

if chew goo is paste thick and swallowed, thus may bind and sap the body... either more chewing salvation is needed, or and fluid after.

The goal of "food" is not to consume solids, But how can it help retain fluids.

Exit the food cult.

Notice: After several eons, the #GrassCult of oats and dead animal consumption; still have not learned how to ongoingly live forever.

EatMoreFruit. #ChewMoreJuice.

Silicone Synthesis

Add Alcohal, to alkalyzed substance.

So basicaly, adding alcohal to alkalized substansnces has a tendancy to oilify.. far as i can recollect so far.. I just watched a video, the Chemist (whom im new to)Apoptosis whom stirs ethanol with Sodium silicate silution to produce kneedable silicone. Wheras I recall an experument i conducted, trying to produce oil synthetically, by alkalyzing carbon, then treating it with methane, in juction with air and water fir several days.. to soaponify similarily. after the cup was spilt or dumped by houshold family member, i was ae to notice flecks of liquid days later that had not evaporated, thus clear oils... ..the silicone effect is similar, thus will all similar polymer productions... Also by evidence of observation by another chemist (a Favorite to be sure!) ActionLab Demonstrating cooling and viscosity thickening (an effect of recent considerations) of ethanol.. thus chemically bonding alcohal to compounds of higher requisite phase temperatures, will thicken the ethanol or alcohal to its goo point at likewise a higher temperature...

#

...